Learn-Function - LEAD dynamic WCD Manuel D'utilisation

ENGLISH
2
Installation
1 x
2.1 Switch your wall controller on.

Learn-Function

+
2.3 Press one of the buttons 1-4 to assign the lumi-
naire to the respective zone and confirm by swiping
the dimmer bar. Complete the entire 'learning' pro-
cess within 15 seconds.
LEAD ENERGY AG Am Stadtbad 37 45219 Essen-Kettwig
On
15 sec.
Subject to errors and amendments
2.2 Note the installation steps from the operating
manual for your LED STATIC WHITE product from
LEAD DYNAMIC. Start the 'LEARN' function on your
LED STATIC WHITE product.
2.4 Your luminaire will flash once to confirm that it
has been assigned to the selected zone and can now
be controlled using your wall controller.
Information / Technical support: www.lead-energy.com