Westfalia 10 - 76 Notice De Montage page 2

SIARR
PREPARATION
* Dismantle the bumper and the shock absorber.
ASSEMBLY
* Locate on each side of the vehicle the 4 pre-pointings (2 on the left
and 2 on the right) wich are found on th back member.
Drill the 4 holes to a diam.10,5mm.
* Locate under the side members, the position of the captive nuts
from the nuts and bolts Y, then put in place.
* Mount the towbar A, only put the nuts and bolts X tough the back
membre. Put the tubular spacers D and E in place ( D : lg.69mm ;
E : lg.67mm), then fit the armsB with the nuts and bolts X and Y
and tighten to the torques indicated below.
* Reassemble the bumper and shock absorber.
* Fit the support ball C with help from the nuts and bolts Z.
Fit the towing ball with the nuts and bolts V.
Tighten everther to the torques indicated below.
FINISHING
* Check that all screws have been correctly tightened.
FASTENING KIT
2 HM10x30 screws
2 Réf.4860-1-150 captive nuts
Y
2 DEC10 washers
2 10-27 plain washers
4 HM10x110 screws
4 HM10 nuts
X
4 DEC10 washers
4 10-27 plain washers
4 10-30 plain washers
M16 AC8.8 19,5daNm M12
M16 AC10.9 27,5daNm M10
M12 AC8.8 8,1daNm M10
ASSEMBLY INSTRUCTIONS
2 HM16x45 screws
V
2 DEC16 washers
2 HM16 nuts
4 HM12x35 screws
Z
4 DEC12 washers
D
Spacer dia.11-15 L.69
E
Spacer 11-15 L.67
TORQUES :
AC10.9 11,4daNm M8 AC8.8
AC8.8 4,7daNm M8 AC10.9
AC10.9 6,7daNm
Type Type
Approval No.
Tow-bar for
Opel Zafira e11*94/20*00*2047
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm Installé suivant nos recommandations, cet attelage vous donnera entière satisfaction.
3,3daNm Nous dégageons toute responsabilité en cas de transformation ou d'utilisation illicite
de celui-ci.
FICHIER : BUREAU\NOTICEDEMONTAGE\SIARR\NDM10\NDM1076-E - FOLIO NDMANG
10 - 76
Max. Total Max. Total
Authori. Weight Towable Weight
2 000 kg 1 300 kg
Max. Verti- Value
cal load D
70 kg 7,73 kN