ninco4rc PREDATOR MT-10 RTR Manuel De L'utilisateur page 7

Please read carefully the instructions before using the car.
FEATURES:
Nh93043 - NH93044 PREDATOR 2,4 Ghz
Length Width
400mm 310mm
CONTENTS:
Items needed for running
Transmitter 2,4Ghz
NOTE:
-Charge the battery for 8-10 hours for the first time usage. Do not charge the battery
unattended.
-When the car is blocked, do not continue to pull/push the trigger, this will cause the ESC
to overheat and damage the ESC
The following items, not included in the kit, are required for assembling your model:
Hexagonal screwdriver
Scissors
Height Wheel
base
160mm 275mm
Car
Transmitter 2,4Ghz
Motor
(Servo-ESC-RX)
Battery Ni-MH 7,2v 2000mAh
8 AA batteries required
4-way cross wrench
needle nose cutter
Gear Ground
ratio clearance
1:10.3 32mm
* BRUSHLESS
VERSION
1:9.354
* BRUSHLESS VERSION
lLi-Po 7,4v 3500mAh
4-way cross wrench
Wheel Wheel
diameter width
118mm 52mm
mini screwdriver
Wire cutter
ENGLISH
Motor*
RC550
*BRUSHLESS
VERSION
3.300Kv / ESC 75