Mounting The Unit - Coby KCD150 Mode D'emploi

Mounting the Unit

When choosing an installation site, make sure that:

an electrical outlet is available and within reach of
the unit

the unit will not be exposed to water

the unit will not be exposed to heat or open flames.
Do not mount the unit near a sink. Do not mount
the unit above a stove.
What you will need:

Screwdriver (cross-head)

Drill with 0.6mm bit

Pencil

Installation template (included)

4 mount adapters (included)

4 mount screws (included)
To mount the unit:
1. Place the mount adapters into the four, notched
sockets of the unit. Make sure that the adapters
match the notches of the socket upon insertion.
2. Use the installation template to mark the mounting
positions, then use a 0.6mm drill bit to drill 4 holes
where marked.
www.cobyusa.com Page 5