Tristar ST-8910 Mode D'emploi page 6

Instruction manual
1
• To turn the unit off and hold the left button for several seconds until
you hear a soft signal, the display turns off. Unplug the power cord and
let it completely cool before you pick up the appliance. There may be
condensation on the iron occur, this is normal. Make iron dry with a
soft cloth. You need the base to empty before storing.
• If the steam button longer than 15 minutes is not pressed the device
will disable in sleep mode, you hear a soft tone, the display is black and
AUTO OFF appears in the display, as shown in the picture.
2
• Press the right or left button to the system to switch on.
the uSe of Your SYSteM With SteaM
• The control device is always at maximum steam power.
6
3
• MAXIMUM steam.
4
• Press the right button once MEDIUM steam power
5
• Press the right button twice MINIMUM steam power
• Press the right button three times for disabling steam use. The steam
not use character in the display.
1. Set the switch on the iron to the desired position. From MIN to MAX.
On the label in your garment, you can find the correct position for the
garment is appropriate, see the table, the meaning of the standings.