Connections To Other Equipment - JVC LT-19D210 Guide D'utilisation

The exact arrangement you use to interconnect various video and audio components to this unit is dependent
on the model and features of each component. Check the Owner's Manual provided with each component for
the location of video and audio inputs and outputs.
To connect the LCD TV/DVD to a VCR
Rear of the unit
To connect the LCD TV/DVD to a VCR with an S-Video cord
If you connect a VCR with a S-Video cable to the S-VIDEO IN jack on the rear side of the unit, you must also
connect the audio cables to the AUDIO IN jacks on the rear side of the unit.
The S-Video cable only carries the video signal. The audio signal is separate.
NOTE:
• When the S-Video cable and the standard video cable are connected at the same time, the S-Video cable
takes precedence.
Rear of the unit
To AUDIO IN
To connect to a DVD player with Component Video Input
You can enjoy a high quality picture by connecting the unit's COMPONENT VIDEO OUT jacks of your DVD
player with the COMPONENT video cables (not supplied).
Rear of the unit
Component video cord (not supplied)
To COMPONENT IN
NOTE:
• Component Video input of the unit are for use with a device which output 480i/1080i interlaced signals and
480p/720p progressive signals.

Connections to other equipment

To VIDEO/AUDIO IN
Video/Audio cord (not supplied)
To S-VIDEO IN
S-Video cord (not supplied)
Audio cord (not supplied)
To COMPONENT
AUDIO IN
Audio cord
(not supplied)
To Video/Audio OUT
To S-Video OUT
To Audio OUT
To Component OUT
Y
Pb
Pr
To Audio OUT
VCR
VCR
DVD
33