OPERATION
STEP 1
Out the electrodes of the plastic bag.
Connect the electrodes to their cable with snap buttons.
STEP 2
Insert the ends of the cables into the output
on the top of the device Sockets.
PS: You can use two pairs of electrodes or well use only one.
STEP 3
Pad placement
Take the pads out of the sealed package.
Remove the clear plastic film from the back of the pads.
Place pads on clean, dry and healthy skin, near or
surrounding the area with pain at least 2 inches apart,
and do not let them touch. Make sure there is a linear
path between the two pads.
50
EN
2
1
3