2
Secure the TV to the Stand.
Use the optional hardware listed as follows (not
supplied):
• M6 machine screws (screwed into the TV's rear cover).
• A screw or similar (attach it to the Stand).
• Rope or chain (strong enough to support the weight of
the TV). Make sure that there is no excess slack in the
rope or chain.
Screw hole on the rear cover
Rope or chain (not supplied)
Screw (not supplied)
The length of the M6 machine screw differs depending
on the rope or chain diameter. Please refer to below
illustration.
8 mm – 12 mm
Screw (M6)
Rope or chain
TV's rear cover
M6 machine screw
(not supplied)
3
Anchor the TV to the wall by using bolts, wall anchor and
chain (or rope).
M6 eye bolts (not supplied)
Wall-mount holes
Please see below illustration for M6 eye bolt length.
8 mm – 12 mm
TV's rear cover
Note
• Your TV is shipped with screws attached to the rear of the
TV depending on the TV model. (They are fastened in the
screw holes for wall mounting.) Be sure to remove the
upper two screws prior to anchoring the TV to a wall.
• Securing the TV to the Stand without securing the TV and
the Stand to the wall provides minimum protection
against the TV toppling over. For further protection, be
sure to follow the three measures recommended.
Precautions
How to care for your BRAVIA TV
Safety is very important. Please read and follow the safety
documentation (Safety Booklet) separately provided.
Unplug the TV and other
connected equipment from the
wall outlet before you begin
cleaning your TV.
• Wipe the LCD screen gently
with a soft cloth.
• Stubborn stains may be removed with a cloth slightly
moistened with a solution of mild soap and warm water.
• If using a chemically pretreated cloth, please follow the
instruction provided on the package.
Rope or
chain (not
supplied)
US
Wall-anchor
(not supplied)
M6 eye bolt
5
US