Product Components; Using Your Cleaner - Hoover FD22G Manuel D'utilisation

Hoover service: To ensure the continued safe and efficient
operation of this appliance we recommend that any servicing
or repairs are only carried out by an authorised Hoover service
engineer.
Do not use the appliance to clean animals or people.
Do not replace the batteries with non-rechargeable batteries.
The Environment:
This appliance is marked according to the European directive 2011/65/EC on Waste Electrical and Electronic
Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by inappropriate
waste handling of this product. The symbol on the product indicates that this product may not be treated
as household waste. Instead it shall be handed over to the applicable collection point for the recycling of
electrical and electronic equipment. Disposal must be carried out in accordance with local environmental
regulations for waste disposal. For more detailed information about treatment, recovery and recycling of this
product, please contact your local city office, your household waste disposal service or the shop where you purchased
the product.
This product complies with the European Directives 2014/35/EU, 2014/30/EU and 2011/65/EU.
CANDY HOOVER GROUP S.r.l. Via Privata Eden Fumagalli, 20861 Brugherio (MB) Italy

PRODUCT COMPONENTS

A. Docking Station
B. 2in1 Dusting Brush
C. Agitator Release Button
D. Power Nozzle
E. Nozzle Led Light
F. Tube
G. Accessory Release Button
H. Handheld Led Light
I. Handheld Unit
J. Crevice Tool
K. Screws Plugs
L. Long Rotation 2 In 1 Brush *
PREPARING YOUR CLEANER
1. Fix the docking station to your wall using the screws and screw plugs provided.
2. Insert the nozzle head into one side of tube until you hear a "click" sound. [1A]
3. Insert another side of tube into handheld unit until you hear a "click" sound. [1b]
4. To fully charge the appliance, connect the charger jack plug to the appliance. It will take around 6Hrs. [2]
NOTE: To remove the nozzle press the nozzle release button and pull away from the main body.
NOTE: Use only the charger supplied with your cleaner to recharge.
IMPORTANT: When charging the cleaner the switch lever must be in the OFF position.
It is normal for the charger to become warm to the touch when charging.

USING YOUR CLEANER

There are two working modes:
• TEMPORARY MODE: The product will start working when you press the on/off switch and stop when released. [3A]
• CONTINUOUS MODE: To enable continuous mode you can pull switch lever back and it will click into place. To disable
continuous mode you can push the switch lever forward. [3b]
* Certain Models Only
M. Charger
N. Dust Cup Empty Button
O. Dust Cup
P. Exhaust Filter Release Button
Q. Switch On/Off
R. Switch Lever
S. Battery Pack
T. Exhaust Filter
U. Mesh Filter
V. Cyclone Separator
W. Dust Cup Release Button
X. Battery Pack Release Button
Y Mini-turbo Nozzle *
5
GB