Apertura ARMONIA Evolution Notice D'utilisation page 8

The speakers are held by two foam end caps and two foam belts. You can now remove them from the
cartons.
Raise speakers on the top foam block, with the draw-string of the protective bag at the top.
Slide up the two foam belts and remove them.
Lower the protective bag and mount the accessories following the drawing bellow.
The loudspeakers stand on their central cone, on the axis of the center of gravity. The four other spikes are
for stability only. These spikes will allow vertically to be achieved even on the most uneven of floors.
Note
: It is not necessary to use force when mounting the four metal stand screws. Over tighten them will
not improve performances, but increase the risk of insert damage.
AperturA une marque de Stentor SAS | www.apertura-audio.com
FRANCAIS
ENGLISH
Including in the accessory
carton:

Front metal stand

Back metal stand

4 spikes sets with nuts

Center cone and headless
screw

4 screws M5x25

5 spike plates

One M5 Allen key (*)

Gloves (*)
(*) in the right speaker accessories box
8