INSTRUCTIONS FOR ASSEMBLY
Ensure all necessary steps are carefully followed to assemble the rebounder, as explained in the
graphical instructions on page 2-3. Once assembled the rebounder, please ensure the ground
pegs are securing the rebounder in the ground. The pegs should be completely anchored and
must be firmly attached into the ground. If the ground is too hard, the rebounder must be saved
with appropriate measures to prevent against overturning in order to prevent risk of injuries.
- Ensure the rebounder is placed on a level surface.
- Sufficient overhead clearance and a clearance of at least 3 meter around the perimeter of the
rebounder is recommended. Please ensure that there are no hazardous objects near the
rebounder such as tree limbs, other recreational objects (i.e. swing sets, swimming pools), electri
cal power wiring, walls, fences, etc.
- For moving the rebounder, use adequate manpower (no less than two people).
- Secure the rebounder to prevent for unauthorized and unsupervised use.
CARE, MAINTENANCE AND STORAGE
This rebounder was designed and manufactured with quality materials and craftsmanship. If
proper care and maintenance is provided, it will provide for years of exercise, fun, and enjoyment
as well as reduce the risk of injury. Use a dry or damp cloth only to clean the product; do not spray
the device with cleansing agents, and do especially take care that any contact with acidic liquids
is avoided.
Always inspect the rebounder before each use for worn, abused or missing parts. A number of
conditions could arise that may increase your chances of getting injured. Do not make any structur-
al changes! If parts become damaged or if sharp edges or corners should develop, the product
may not be used any more. Always inspect the rebounder before each use and replace any worn,
defective, loose or missing parts. Properly store when not in use or during off-season. In heavy rain,
wind or storm conditions, disassemble and store the rebounder accordingly.
Please be aware of:
- Check all nuts, spring buttons and bolts for tightness and tighten when required.
- Check all coverings and sharp edges and replace when required.
- Check for bent or broken frame parts.
- Check all coverings and sharp edges and replace when required
- Defective parts have been replaced by original Renox Sports spare parts.
WARRANTY
For warranty information please check our website; www.renoxsports.com. Warranty can be
claimed by presenting the original invoice. The warranty applies only to the material and construc-
tions defects with respect to the product or its components. The warranty lapses if:
- The product is used incorrect or negligent or in an inappropriate way.
- The product is not installed according to the instructions / maintenance.
- Defects caused by external influences (e.g. climate influences such as normal weathering by
UV rays or normal wear and tear).
- Changes or modifications to the rebounder are not permitted.
- The product is used for public or the recreational market.
- Defective parts have been replaced by not original Renox Sports spare parts.
Renox Motion - 5105 + 5106
GB
09
02