Alto Professional Radius 100 Guide D'utilisation page 5

Features
Transmitter
Your Radius 100 includes one of the following transmitter systems:
•
Radius 100: a hand-held condenser vocal microphone transmitter
•
Radius 100H: a headset microphone and wireless belt-pack transmitter
•
Radius 100L: a lavalier microphone and wireless belt-pack transmitter
•
Radius 100M: a 1/4" (6.35mm) instrument adapter cable and wireless belt-pack transmitter
Condenser Microphone Transmitter
1. Power/Mute Button: Press this button for 4 seconds to power the
6
2. Power/Mute LED: This light indicates the power or mute status:
4
3. Sync Button: Press this button to synchronize the transmitter with the
4. Display: This display shows the current channel and battery power level.
5. Battery Compartment (not pictured): Insert 2 AA batteries into the
3
5
6. Grille: This mesh protects the microphone capsule and reduces noise
2
1
transmitter on or off. When the transmitter is on, press this button briefly
to mute or unmute the microphone.
•
Red light: The transmitter is on.
•
Flashing red light: The transmitter is low on battery power.
•
Blue light: The transmitter is muted.
•
Flashing blue light: The transmitter is muted and low on battery
power.
receiver. See Operation
compartment. Make sure the polarities of the batteries (+ and –) are
correct.
from air and breath.
(Radius 100)
to learn more.
5