e-TWOW S2 BOOSTER E Manuel Utilisateur page 16

WARNING!
To avoid dangerous situations, we recommend that you only use this function for
climbing ramps, or that you only use it on specially arranged tracks.
Setting the function
To set the P1 function follow these instructions:
• Turn on the scooter
• Press the electromagnetic brake lever all the way and keep it pressed
during the entire operation.
• Press the power button. The display will show the P1 symbol.
• The function has two options: On and Off. To navigate between On and Off,
press the Setting (S) button.
• To save your settings, release the electromagnetic brake lever.
15