Transportation, Storage And Disposal; Activate Frost Protection; Disposing Of Your Old Appliance; After-Sales Service - Siebert TP5 Notice D'utilisation

en Transportation, storage and disposal
Transportation, storage
and disposal
Here you will find out how to prepare
your appliance for transportation and
storage. You will also find out how to
dispose of old appliances.

Activate frost protection

Protect your appliance from frost dur-
ing transportation and storage
Requirements
The appliance is now ready to use.
¡
The water tank has been filled.
¡
ATTENTION!
Possible damage to the appliance dur-
ing transportation or storage due to li-
quid residues in the appliance.
▶
Empty the pipe system before trans-
portation or storage.
Place a large container under the
1.
outlet system.
Press and select "Milk froth".
2.
Press ⁠ .
3.
Remove water tank.
4.
The appliance will automatically
a
empty its pipe system and switch it-
self off.
Empty the water tank and the drip
5.
tray.
Clean the appliance thoroughly.
6.
Disposing of your old appli-
ance
Valuable raw materials can be re-
claimed by recycling old appliances.
Unplug the appliance from the
1.
mains.
Cut through the power cord.
2.
70
Dispose of the appliance in an envir-
3.
onmentally friendly manner.
This appliance has been identi-
fied in accordance with the
European Directive 2012/19/EU
on Waste Electrical and Elec-
tronic Equipment (WEEE).
This Directive provides an EU-
wide framework for returning and
recycling old appliances.

After-sales service

If you have any queries, are unable to
rectify faults on the appliance yourself
or if your appliance needs to be re-
paired, contact after-sales service.
You can solve many problems yourself
by consulting the information on
troubleshooting in these instructions or
on our website. If this is not the case,
contact our after-sales service.
We will always find an appropriate solu-
tion.
With any warranty claims, we will make
sure that your appliance is repaired by
after-sales customer service techni-
cians using original spare parts, includ-
ing after the manufacturer's warranty
has expired.
Note: Under the manufacturer's war-
ranty conditions, use of the after-sales
service is free.
When contacting after-sales service,
you will need the product number (E
no.) and the production number (FD
no.) of your appliance.
The contact details of the after-sales
service can be found in the after-sales
service directory at the end of the in-
structions or on our website.