8. VIEWING A FILM NEGATIVE
1. Press the power button to turn on the light.
2. Make sure the film is flat before feeding it through the unit.
3. Feed the film through the film input, located on the right side of the unit
when the magnifying lens is facing you.
4. When you have finished viewing the film, carefully guide the film out
through the film output, located on the left side of the unit.
5. When you have finished using the unit, press the power button to turn
off the light.
9. CARE AND MAINTENANCE
• When storing for an extended length of time, remove the batteries from
the battery compartment and store the slide viewer in a dry place.
• Clean the magnifying lens with a soft dry cotton cloth or lens cleaning paper.
EN |
12