IMPORTANT: Always switch off the fan and unplug it when not in use.
CLEANING AND STORAGE
• Turn the unit OFF and unplug the unit before cleaning.
• Remove the front guard by loosening the clip and screw and then pull the fan off its spindle for cleaning.
The fan blades can be washed in warm water using a little mild detergent. Alternatively, they may be wiped
over with a soft damp cloth. Ensure the fan is completely dry before re-fitting.
• The front guard can be removed for cleaning by using a soft brush or damp cloth. Clean the rear guard using
a soft brush or damp cloth (DO NOT REMOVE THE REAR GUARD). On reassembly, ensure that the safety
guard locking screw and clip are re-fitted correctly..
• Do not immerse the unit in water and never allow water to drip into the motor housing.
• Do not use gasoline, paint thinner or other chemicals to clean the fan.
• Store the unit in the original box and store in a cool, dry place.
NOTE: If you experience a problem, please return the unit to the place of the original purchase or see your war-
ranty. Do not attempt to open the motor housing yourself. Doing so may void your warranty and cause damage
to the fan or personal injury.
SPECIFICATIONS
Voltage: 120V
Rated Frequency: 60Hz
Rated Power: 20W
Speed Settings: Low (1), High (2)
Visit our website to contact us, find answers to Frequently Asked Questions, and for other resources which may
include an updated version of this user's guide.
CUSTOMER SUPPORT
If you wish to contact us by phone, please be sure to have your model number and serial number ready and call
us between 9:00am and 6:00pm ET, at +1 866-954-4440.
Keep tabs on Impecca's newest innovations & enter contests via our social network feeds:
© 2018 Impecca, a division of LT Inc., Wilkes Barre, PA.
WWW.IMPECCA.COM
www.facebook.com/Impecca/
www.instagram.com/impecca/
@impeccausa
6