Spectrum SPMVM430 Manuel D'utilisation page 5

3. Unfold the sunshade as shown below in fig. 1.
4. Turn on the monitor and look for a clean channel. Clean channels will have
a consistent static background. Channels with interference will display
horizontal static lines. Select one of the clean channels.
5. Once you have chosen a clean channel on the monitor, select the same
channel on the video transmitter (if you are not using a compatible FPV select
video transmitter).
Fig. 1
To mount the video monitor to a
transmitter, install the transmitter mount
as shown in fig 2. The mount comes with
two adapters to fit most transmitter neck
strap mounts.
Once installed on the transmitter, use the
mounts built in neck strap loop to mount
a neckstrap if desired.
Fig. 2
5
EN