IOGear Thunderbolt 3 Mode D'emploi page 3

2
Hardware Installation
STEP 1. Connect the included AC Adapter to the DC input port on the
docking station.
DisplayPort
STEP 2. Connect a DisplayPort cable from the docking station to the external
DisplayPort Monitor for up to 4K of resolution.*
DisplayPort
STEP 3. You can connect a USB-C 4K Monitor directly to the rear Thunderbolt 3
port. For USB-C monitor setup, simply plug in the USB-C cable from your monitor to
the Thunderbolt 3 port. If your second monitor is equipped with HDMI, DisplayPort
or VGA input, use an USB-C to video adapter to connect it to your monitor.**
The same Thunderbolt 3 port for video output can also be utilized to connect or
daisy chain additional Thunderbolt 3 devices.
DisplayPort
SD
microSD
CF
or
D