INFOSEC UPS SYSTEM E3 Performance 800 RT Notice D'utilisation page 32

2.3 Install the UPS
For safety consideration, the E3 Performance is shipped without connecting battery wires.
Before installing the UPS, please follow the steps below to re-connect battery wires.
Step 1

Remove front panel.
Rack-mount installation
Step 1

Tower installation
Step 1

2.4 Setup the UPS
Step 1 - UPS input connection

Plug the UPS into a two-pole, three-wire, grounded receptacle only. Avoid using extension
cords.
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
32
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - hotline@infosec.fr – 02 17 AA 59 204 40
Step 2

Connect the AC input and
re-connect battery wires.
Step 2

Step 3

Put the front panel back to the
unit.
Step 2


Step 3