Getting Started; Turning Off; Charging - Klipsch X12 NECKBAND Mode D'emploi

GETTING STARTED

1. Turn on the headset by pressing the Power/Pair button for 4
seconds. The headset will automatically go to pairing mode and
the status indicator will begin pulsing BLUE.
2. Connect to "Klipsch X12 Neckband" from your device.
3. Once connected, the headset will periodically blink BLUE.
Note: The headset will automatically pair to the last device
connected to it when turned on.

TURNING OFF

Press the Power/Pair button for 5 seconds to turn the headset off.

CHARGING

Use the included Micro-USB cable to charge the headset from your
computer or USB wall adapter (not included). The status indicator
will glow RED until the headset is charged, at which point it will
turn off.
12