Scanner Options; Removing And Installing An Inkjet Print Cartridge; Removing A Used Cartridge - Olivetti OLISCAN A600 Guide D'utilisation

7. Reinsert
applying a slight pressure to the
tray to facilitate the nuts sliding
into place.
WARNING: During insertion operations be very careful not to damage
the ADF module.
Be sure that the insertion points are well aligned before
pushing the module down to the operating position.
Be sure that the ADF module is anchored well in place.
NOTE:
For safety reasons, the unit is disabled by an interlock switch
when the top cover is not correctly positioned.
S O
CANNER

Removing and Installing an Inkjet Print Cartridge

Removing a Used Cartridge

1. Switch off the machine using the rear
switch. Extract the document input tray.
2. Lower the inkjet cartridge bay with the
cartridge installed by rotating it in an
anti-clockwise direction.
3. Remove the print cartridge by holding it
at the bottom and pulling in an upward
direction, pressing the lever on the
cartridge to release it.
4. Extract the cartridge through the rear
opening on the cartridge bay.
20
the ADF module,
PTIONS
OLISCAN A600 - USER'S GUIDE