English Manual
5.5
Windows
Follow the steps below to install Windows
5.5.1 Power on your computer and make sure that the USB port is enabled and
5.5.2 Insert the USB-Serial adapter software driver into the CD-ROM drive and
5.5.3 Select Search for a suitable driver for my device (recommend) and click
5.5.4 Select the "Specify a location" drive and click "NEXT" to continue.
2000 Driver Installation
®
working properly.
Plug in the USB-Serial adapter into the USB port, Windows will run the
Found New Hardware Wizard to assist you in setting up the new device.
Click "Next" to continue.
"NEXT" to continue.
®
2000 driver: