Yoo Digital Home VAPYOO 900 Mode D'emploi page 11

2. take the filter upwards out from the water
fill hole. (You can take the filter out of the
opening for filling water into water tank, or
fill water into water tank directly with the
filter existing in the opening) fig.3
3. fill the water tank up to or below the
"MAX" fill line with clean tap water. fig.4
4. Replace filter back into water filling hole.
5. Replace the water tank into the base unit
again. It will be locked in place with the
base unit until a "click" sound is provided.
(Water tank decoration indicator light will
light up to indicate that water tank and fil-
ter have been installed in place if power
oN) fig.5
6. Always pour out the remaining water after
use.
f U N C tI oN S fo R WAtE R tA NK D EC o R At I o N IN D I CAto R LI gH t
1. After power on, water tank decoration indicator light will light up. Water tank decoration indi-
cator light blinks to show that no water or not enough water in water tank, please fill water to
Max level. After filled water, water tank decoration indicator ligth will light up steadily for easy
viewing water level.
2. Water tank decoration indicator light will not light up when water tank or filter are not well
installed in place, and no steam escaped even if steam button is pressed. this will alarm by 5
"BEEP" sounds from base unit.
S t EA M fU NCt Io N SEt tI N g
once the unit energized with power supply, steam indicator light automatically sets at low steam
setting. Press steam selection switch to change to MAX or Medium steam setting. If steam ironing
is not necessary, please turn off the steam selection switch, and wait for all steam indicator light
going out. It can cut off steam ironing function. for steam ironing again, only to press down steam
selection switch.
__________________________________________________________ USER'S MANUAL I.WIP 1200 9
EN