Lagrange Transparence 489 Notice page 55

UPKEEP
CAUTION:
Never put the unit or the plug into water and never put
*
it in a dishwasher.
Make sure that the unit is unplugged before cleaning it.
*
Do not use mechanical or any other means to speed up
*
the defrosting of the unit.
Rinse thoroughly before turning on.
*
Whether at the time of the initial installation or after a
*
long period with no use, always use soft water before
starting to make ice cubes.
Body of the unit: Clean with a moist sponge.
*
Never spray the unit with chemical products or dilution
agents such as acids, gasoline or oil.
Plastic cover: Clean it with a moist sponge. Dry it thoroughly.
*
Never use abrasive or aggressive cloths or products in order to
protect the plastic and its shine.
Water tank and interior walls: Drain, clean with a moist sponge
*
and dry thoroughly. You can use a diluted solution of water and
white vinegar. Rinse thoroughly and dry before reusing the unit.
To ensure that the ice is clean, change the water in the tank at
*
least once a day. In the event of a prolonged period without using
the unit, empty the water tank and clean it thoroughly.
Ice cube bin and ice cube scoop: Clean them with a damp
*
sponge and dishwashing liquid or use a diluted solution of white
vinegar in water. Dry the ice cube bin thoroughly before putting
it back in the unit.
Ice cube making system: Clean the ice cube making tray and
*
the ice cube making plate frequently, using a diluted solution of
water and white vinegar.
STORING OF THE UNIT
Remark: Always dry all of the elements thoroughly before
repositioning them and storing them.
Unplug the unit after use.
*
Wait for it to cool down
*
Empty the tank if you won't be making more ice cubes right away.
*
Always wash and dry all of the parts before putting them back
*
in place.
Aerate the unit by opening the cover after use so that it dries on
*
the inside.
Store the unit with the cover closed on a flat and easily
*
accessible surface.
Do not put anything on top of your unit.
*
55
E N G