Alarms Menu; Controller Installer Menu Guide - ECOFOREST ecoSMART e-manager Manuel D'utilisation

5.10. ALARMS Menu

Press for quick access to the information menu from the main screen.

6. Controller installer menu guide

To access the installer menu, press
the type of installation and the services the heat pump will deal with, to adjust the various operation parameters and protections
as well as to carry out various start-up and maintenance operations.
This menu shows the sub-menu structure of the INSTALLER menu.
Sub-menu level 1
a.
Language
b.
Configuration
c.
Information
d.
Manual activation
e.
Default values
f.
Change password
Active alarms
These screens display the alarms that are or have been active. The
remains on if there is an active alarm locking the system. It also flashes if there is any kind
of active alarm that does not lock the system or if the system has recovered after any kind
of alarm.
Reset alarms
Once the problem that caused the alarm has been resolved, the alarm can be reset on this
screen. The button will switch off.
at the same time. Afterwards, enter access password PW1. This menu is used to define
INSTALLER menu
Sub-menu level 2
b.a.
Source management
b.b.
Source configuration
b.c.
Remote control
b.d.
Protections
b.e.
Probe Conf.
Table 6.1. INSTALLER menu structure.
56
ecoSMART e-source
user, installer and technical service manual
Sub-menu level 3
b.b.1.
Source 1
b.b.2.
Source 2
b.b.3.
Source 3
b.b.4.
Source 4
button lights up and