LENCO SCD-341BK Mode D'emploi page 8

POWER SUPPLY
AC
Connect the power cord to the AC socket of the device. Connect power cord plug to
the household power outlet.
DC
6 x 1.5V "C" size batteries (Not included) into the battery compartment.
POWER SORUCE
Press the "POWER" button to turn the appliance ON or Standby.
Press the "SOURCE" button to choose different modes.
VOLUME CONTROL
Press the "VOLUME +/-" button to adjust the volume level.
ANTENNA
Use Antenna to improve the signal reception.
Extend the antenna.
Adjust the position of the antenna for the best reception.
FM RADIO
Press the "SOURCE" button to select the FM mode.
Press the "SCAN" button to find the nearest station.
Press or hold the "TUNE +/-" button to search for automatic frequency of the nearest
station.
PRESET STATION
30 memory preset station = FM Preset memory is in the power failure
PRESET STORE
Press the "TUNE +/-" button to select the radio station.
Hold the "PRESET" button to preset store mode.
Press the "SKIP +/-" button to choose the number of preset station (From 1 to 30).
Press the "ENTER" button to confirm the selection.
Hold the "SCAN" button to do full scan. Some stations are automatically stored with
suitable signal strength.
After the search is completed, the first stored station is broadcast automatically.
8