Scope Of Delivery; Technical Design; Technical Data - SATA air regulator Mode D'emploi

Operating instructions SATA air regulator
EN
ers and consists of the main parts:
■ Connection breathing protection hood [2-6]
■ Connection compressed air supply [2-5]
■ Air volume flow controller [2-2]
■ Quick-action coupling for the connection of the spray gun [2-3]
■ CCS disk [2-1] to personalise the air regulator
■ Fastening module [2-7] to fasten the air regulator to the carrying strap
■ Hinged hood holder [2-4] for fitting the breathing protection hood
Notice!
The fastening module is mounted for an operation with the spray gun in
the right hand and can be switched accordingly for left-handed persons.
Notice!
After being attached to the carrying strap, the air regulator can be
placed at an angle from the base position if required. Individual locking
positions are 22.5° and 45° forward or backward.

5. Scope of Delivery

■ SATA air regulator
■ CCS-disks, 1 bag (red, black, green, blue), red is mounted

6. Technical Design

CCS-disk
[2-1]
[2-2] Air volume flow controller
[2-3] Connection spray gun
[2-4] Cover bracket, can be
folded out
Connection compressed air
[2-5]

7. Technical Data

Description
Required operating pressure with-
out spray gun
Necessary operating pressure with
spray gun (in combination with 1.2
m spray air hose Art. No. 13870)
Max. operating pressure
54
supply
[2-6] Connection breathing pro-
tection hood
[2-7] Fastening module, rotating
Adapter plate
[2-8]
2,5 bar – 3,0
bar
4,0 bar – 6,0
bar
10,0 bar
Unit
35 psi – 44 psi
58 psi – 87 psi
145 psi