Télécharger Imprimer la page

Solem BL-IP Guide D'installation Rapide page 12

Programmateur d'irrigation à pile
Masquer les pouces Voir aussi pour BL-IP:

Publicité

Les langues disponibles

Les langues disponibles

How does the rain sensor work? The rain sensor when it is
connected instead of the yellow wire (see wiring step for each model)
affects all the 3 programs. If it rains and the rainsensor is active,
programs A or B or C will not start. It is necessary to wait until the
probe has dried to see the programs restart. The manual control «All
stations» does not take into account the condition of the rain sensor.
What is the Water Budget? The Water Budget adds a % of time to the
duration of each station. It is typically used when changing seasons (for
example summer to automn, or spring to summer).
Ex: If you entered Station 1 = 1h on Program A and Station 2 = 0h30
on Program A, then enter a Water Budget 120 % for Program A.
When the Program A starts, the stations 1 and 2 will be increased by
20%, (ex 1h12 for Station 1 and 0h36 for Station 2).
How can I restart the initialization procedure (for example : change
the router acces point) ? To reset a device or restart an initialization
procedure, short circuit the 2 pads of the battery pressure (remove the
9V battery previously) for 30s minimum.
If my device does not have a battery, do I lose programs? Programs
are never lost, they are saved in a memory.
I would like to resume the programming from the beginning, how
to do? If you want to resume programming, go to the application,
enter the product and then open the p Parameters and select «Clear
programs and durations».
12

Publicité

loading