GE AEE08 Manuel D'utilisation Et Instructions D'installation page 9

Window Installation Instructions
REMOVE THE AIR CONDITIONER
3
FROM THE CASE (CONT.)
Slide the air conditioner from the case by
E
gripping the base pan handle and pulling
forward while bracing the case. Do not
pull or lift on the styrofoam discharge area.
INSTALL THE BOTTOM
4
CASE SEAL
• P eel the backing from the bottom
case seal and attach it along the
bottom of the case in front of the bottom
mounting rail.
Bottom
mounting rail
Do not
pull
or lift
in this
area—
damage
to the
unit may
result
FRONT
Bottom case seal
INSTALL THE TOP
5
MOUNTING RAIL ONTO THE CASE
Attach the top mounting rail onto the top
of the case with 3 Type B screws.
Press firmly to drive the screws into the
gasket and through the top mounting rail.
INSTALL THE
6
SIDE ACCORDION PANELS
Slide the left and right accordion panels
A
into the top and bottom mounting rails.
B Attach the accordion panels to the case
using 3 Type A screws on each side.
Accordion
panel
Type A
screws
9
Type B
screws
Top
mounting
rail
Top mounting rail
BACK
Bottom mounting rail