Publicité
Les langues disponibles
Les langues disponibles
User Manual – Security Monitors - TML2212P / TML2413PT / TML4313M
This manual is applicable for the following products:
TML2212P, TML2413PT, TML4313M
IMPORTANT INFORMATION FOR SECURITY
You must carefully read this manual before use and installation of the product and keep this manual
properly.
Warnings:
Failure to comply with the following instructions may cause serious injury or death.
In the use of the product, you must be in strict compliance with the electrical safety regulations
●
of the nation and region.
Refer to technical specifications for detailed information.
●
Do not connect several devices to one power adapter as adapter overload may cause
●
over-heating or a fire hazard.
Make sure that the plug is firmly connected to the power socket.
●
If smoke, odor or noise rise from the device, turn off the power at once and unplug the power
●
cable, and then contact the service center.
If the product does not work properly, contact your dealer or the nearest service center. Never
●
attempt to disassemble the device yourself. (TKH Security Solutions shall not assume any
responsibility for problems caused by unauthorized repair or maintenance.)
Cautions:
Failure to comply with the following instructions may cause injury or damage to device.
Do not drop the device or subject it to physical shock.
●
When the product is mounted on wall or ceiling, the device shall be firmly fixed.
●
Do not bend, pull or drag the power cord, and do not change the position of the power cord
●
randomly. Make sure the power cord is away from the heat resource in case of the fire or
electric shock. Contact the dealer if there is anything wrong with the power cord.
The screen may be burned out by a laser beam, so when any laser equipment is in using, make
●
sure that the surface of screen will not be exposed to the laser beam.
To avoid heat accumulation, good ventilation is required for operating environment.
●
Keep the device away from liquid while in use.
●
While in delivery, the device shall be packed in its original packing, or packing of the same
●
texture.
Improper use or replacement of the battery may result in hazard of explosion. Replace with the
●
same or equivalent type only. Dispose of used batteries according to the instructions provided
by the battery manufacturer.
Some original mechanical or electrical components have special safety protection functions
●
(high rated voltage or rated power, etc.). Replace the original components carefully. Because the
replaced components may not conform to the special safety requirements and may cause
electric shock, fire or other potential danger.
2
Publicité
