Nowsonic AUTARK ID07 Mode D'emploi page 9

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

www.nowsonic.com
Outlets and controls on the rear panel
The following outlets and controls are available on the back panel of
Autark
:
ID07
5
6
7
8
4
3
8888
1. Mains sockets / fuse
Here you connect the supplied
you can daisy-chain the mains to following devices. In addition, you
can replace the internal fuse here in case it should be blown due to
overload: use in every case a replacement fuse with identical specifi-
cations.
2. Menu and operating buttons
Autark
ID07
is locally controlled via the buttons underneath the
display. Navigating the uppermost menu level is done via the
button and the
and
buttons. For navigating the sub menu level,
press the
ENTER
button and again the
2
ENTER
button in order to open a menu item or to confirm your entry.
Press again the
ENTER
or
1
3.
WIRELESS SWITCH
This button activates the internal receiver of Autark
position, Autark
ID07
can be controlled either via the supplied remote
control or via a wireless
DMX
9
DMX
receiver is entered via the menu.
9
Nowsonic Autark ID07
User manual
power cable. Using the
IEC
and
buttons. Press the
MENU
button, to exit a sub menu.
ID07
transmitter: the address for the internal
GB
outlet
IEC
LED
MENU
. In the I

Publicité

Table des Matières
loading

Produits Connexes pour Nowsonic AUTARK ID07

Table des Matières