Konig Computer CMP-EHUB41 Mode D'emploi page 3

Troubleshooting
1. The Power LED is not lit
Make sure the AC power Adapter is plugged into an outlet properly and it's connector is plugged into
the power jack of the switch.
Make sure the power source is ON.
2. The Link/Act LED is not lit when a device is connected to the corresponding port
Make sure that the cable connectors are firmly plugged into the Switch and the device.
Make sure the connected device is turned on and its adapter is installed correctly and is working.
The cable must be less than 100 meters long (328 feet).
Declaration of conformity
We,
Nedis B.V.
De Tweeling 28
5215MC 's-Hertogenbosch
The Netherlands
Tel.: 0031 73 599 1055
Email: info@nedis.com
Declare that product:
Name: KÖNIG
Model: CMP-EHUB41 & 51
Description: 5 & 8 port gigabit switch
Is in conformity with the following standards
EMC: EN 55022: 1998 + A1:2000 + A2:2003 + A2:2006
EN 61000-3-2:2000, EN 61000-3-3: 1995 + A1:2001
EN 55024: 1998 + A1: 2001 + A2: 2003
LVD: EN 60950-1: 2001, EN 60950-1: 2006
Following the provisions of the EMC directive 89/336/EEC and LVD 2006/95/EC.
's-Hertogenbosch, January 2008
Mrs. J. Gilad
Purchase Director
2