Geemarc AMPLICALL16 Mode D'emploi page 7

TROUBLESHOOTING
Trouble shooting
Symptom
The unit makes the
"dingdong" sound (ad
hoc or continuously)
without the door bell
being pressed
Low battery LED is
flashing.
Batteries and power
adaptor are connected
correctly, yet no
"Dingdong" sound when
the door bell is pressed.
Solution
1) Check the batteries are
inserted correctly
2) Check the power adaptor
is inserted into the unit
and the wall correctly (if
using mains power)
3) Turn off the power switch
for 10 minutes and then
turn it on
1) Turn off the power switch
for 10 minutes and then
turn it on
2) Insert new batteries into
the base unit
1) Turn off the power switch
for 10 minutes and then
turn it on
2) Replace the base unit
batteries
3) Replace the door bell
batteries
6