Hommel Hercules 37104 101 Mode D'emploi page 6

between the two surfaces.
• To switch to absolute measurement, press the "On/OFF/Le-
vel" button for 3 seconds.
• „HOLD" (hold function) – press the „HOLD" button after
measuring. „H" appears in the middle above the measured
value. Press again to return to the measuring mode.
• By pressing the „ON/OFF/Level" key or after 3-5 minutes of
inactivity, the unit switches off automatically.
• If „ „ appears in the display or no display appears, please
replace the 9V battery by removing the rear panel.
3. Cleaning
• Please do not use cleaning agents such as alcohol/acetone
4. Technical data
• Resolution: 0.05°
• Repeat gene.: 0.05
• Accuracy: ±0.02°
• Operating temperature: +5° to +40°
H o m m e l H e r c u l e s