Carlett Lett460 Mode D'emploi page 23

e advise
ssembly
he base
ch.
o unfold
all the
the foot
stall the
gh the
o rear
.
T: It is
check
buttons
on of the
axle has
. Check
tion has
o. 1)
4.1) Attach it to the upper bar of the chassis
using the upper Velcro strip.
4.2) Then, attach it to the base of the chassis
via the three Velcro strips on the lower part
(one front and two side).
4.3) Finally, attach it to the central bar via
the remaining Velcro strip.
5) In order to attach the front wheels, simply
insert the corresponding wheel blocks at the
ends of the front vertical bars until you hear a
clicking sound.
6) To attach the rear wheels, press the central
button of each wheel and insert fully into the
axle. Apply pressure until you hear the clicking
noise, which will let you know they have been
correctly installed.
Once completed, the shopping trolley will be
ready to use.
Lett460, natural elegance
A trolley that comes with the best features.
Manufactured from aluminium, it is both agile
and versatile making this an ideal shopping
partner. The anti-roll bar provides additional
en
23