Publicité
1. Unique identification code of the product-type :
Model reference:
2. Type, batch or serial number or any other element allowing identification of the construction
product as required pursuant to article 11(4): .............Shower enclosures
3. Intended use or uses of the construction product, in accordance with applicable harmonized
technical specification, as foreseen by the manufacturer:
Personal Hygiene-PH
4. Name, registered trade name or registered trade mark and contact address of the
manufacturer as required pursuant to article 11 (5):
AURLANE 32 rue Washington 75008 PARIS
5. Where applicable, name and contact address of the authorized representative whose mandate
covers the tasks specified in article 12 (2): not applicable
6. System or systems of assessment and verification of constancy of performance of t the
construction product as set out in Annex V: AVCP system 4
7. In case of the declaration of performance concerning a construction product covered by
harmonized standard:
8. In case of the declaration of performance concerning a construction product for which
European technical assessment has been issued: Not applicable
9. Declared performance :
Essential characteristics
Cleanability
Impact resistance/shatter properties
Durability
10. The performance of the product identified in points 1 and 2 is in conformity with the
declared performance in point 9.
This declaration of performance is issued under the sole responsibility of the manufacturer
identified in point 4.
Signed for and behalf of the manufacturer by :
DECLARATION OF PERFORMANCE
N o DoP_FAC_003
FAC005-FAC300
EN14428:2004
Performance
PASS
PASS
PASS
Sébastien Doumenc
Aurlane Associate Director
Paris, le June 15th 2017
Harmonized technical
specification
EN14428:2004
+A1:2008 (4.2)
EN14428:2004
+A1:2008 (4.3)
EN14428:2004
+A1:2008 (4.4)
Publicité
