Olimpia splendid PELER 6E Mode D'emploi Et D'entretien page 15

Please pay attention when adding water to:
1. Unplug the appliance
2. Before refilling, remove any remaining water
3. Use only clean water
4. Fill the water tank slowly
5. Pay attention to the front water level display window to not exceed the maximum
level
6. Lock the tank with the slider pin, to prevent the tank falling.
3 - OPERATING INSTRUCTIONS
-
Before connecting the power supply, please read the safety precautions and make
sure that the power socket voltage conforms to the requirements of the air-cooler
unit.
- After turning on the power, the air-cooler will sound Bi Bi twice, then enter Standby
mode. At this time other keys are invalid except the Power on/speed key (Power on
sound: BiBi, Key Sound: Bi, Switch off sound: Bi).
1. ON-OFF KEY: On pressing this key, issuing a Bi sound, the appliance enters normal
working state.
In working state, pressing this button will make a Bi sound, then it will go to standby
status.
2. Speed Key: press this key to select the desired ventilation speed, minimum, medium
or maximum.
3. Swing Key: press this key to switch oscillation on, the indicator switches on; press
the key again, the indicator switches off, and so on.
4. Cooling Key: to switch the cooling function on, relevant indicator switches on; press
the button again, the cooling function and relative indicator will turn off, and so on.
4.1. When the Cooling function turns on, the water pump will work for 45 seconds before
testing the water level; if the water level remains below the set level for 5 seconds,
the cooling function will turn off automatically, and the BiBi sound will last for 10
seconds.
5. Timer Key: In the initial state, press this key to open the timer function, setting
model: 1-2-3-1-2-3..... and so on.
The LED indicates a corresponding time.
EN - 7
PELER 6E