Cleaning; Disinfection Of The Hydro Silk System; Cleaning The Air Inlet; Warranty - Schmidlin HYDRO SILK Mode D'emploi

04 English

Cleaning

Empty the bathtub and rinse with water after every use. Light dirt can be
removed with a mild detergent. Leave the detergent to take effect for a while
on more stubborn dirt. Rinse well with water.
Disinfect the HYDRO SILK system regularly in accordance with the description
under «Disinfection of the HYDRO SILK system» (page 33).
Carry out final drying of the HYDRO SILK whirl system after rinsing in
accordance with the description under «Final drying of the HYDRO SILK
system» (page 33).
After rinsing / disinfecting and/or final drying: dry the bathtub and all chrome
parts with a soft, dust-free cloth.

Disinfection Of the HYDRO SILK system

The HYDRO SILK system should be disinfected regularly (especially before
using for the first time and if it has not be used for a longer period of time).
Pay attention to the instructions for use and dosage on the bottle. Add the
disinfectant to a tub filling of at least 5 cm above the nozzles.
The disinfectant recommended by Schmidlin can be used for regular
disinfection. This is specially matched to the materials used for the Schmidlin
whirl components and is available from specialist dealers or Schmidlin directly.
If bath additives are used, disinfect the tub with fresh water (filling level
5 cm above the nozzles).
32
Important
Empty the bathtub after every use since chrome can flake from the nozzles
if water is left in the bathtub for longer periods of time.
Do not use any disinfectants that contain chlorine or aggressive detergents
and descaler!
Lime scale deposits can be avoided by always wiping the surfaces dry after
use. Lime scale deposits can be removed with a lukewarm water-vinegar
solution (diluted 1:1). Important: do not use undiluted vinegar concentrate!

Cleaning the air inlet

Grip the air inlet grille on the side to pull it away from
the frame and remove it. Carefully remove hair and
other dirt. To avoid damaging the second protective
mesh, do not use sharp objects. After cleaning, press
the air inlet grille back into the frame.

Warranty

We grant a 2 year warranty on Schmidlin HYDRO SILK system.
04 English
33