Wax Mask Preparation; Esthetics); Functional Impression - Ammann Centrofix Instructions D'utilisation

The placement and position can be cor-
rected during the soft phase of the
autopolymerizate.
▷ Make sure that the contours of the
tracer mounting are sharp-edged encir-
cled by the autopolymerizate, yet do not
protrude. The detachability of the tablet
must be ensured.
Fig. 7 Mandibular tray with positioned tracer
mounting aligned in the clamp
Fig. 8 Both trays finished. Tracing ball unlocked
A P P L I C A T I O N
6.3 Wax Mask Preparation (Parameter
for Esthetics)
▷ Adapt a soft wax mask [B] on the models.
Later on, the lines for lip-closing, middle tooth,
canine tooth and the smile line will be marked.
B
Fig. 9 Pre-fabricated wax mask
6.4

Functional Impression

Mandible
▷ Remove the tracing tablet.
Fig. 10
▷ Perform the mandible functional impression
with an individual plastic tray.
▷ Remount the tracing tablet.
E N
21