Olimpia splendid PELER 20 Mode D'emploi Et D'entretien page 28

3- INSTRUCTIONS FOR OPERATION
1. Insert the plug in the power socket.
When the appliance is switched on for the first time, it emits two
"beeps" and switches to stand-by mode; all the keys are disabled
except for the ON/OFF key.
2.
Press the ON/OFF key (C1) to switch the appliance on (a beep is heard)
3.
Press the ON/OFF key (C1) again to switch the appliance off (a beeeep is
heard)
A beep is heard every time a key is pressed
3a - ON/OFF key (C1)
During stand-by mode, all the keys are disabled except for the ON/OFF key.
Press it to switch the appliance on.
The air initial speed is set to "medium" by default.
The LED corresponding to the "normal" mode (A4) switches on and the timer, air
directing and cooling/humidifier functions are available for use.
When the appliance is running, press this key again to turn it off (stand-by mode).
Press it again to switch the appliance back on at the last set speed.
If speed was set to "low" (C4) or "silent" (C3) before switching off, the appliance
starts at "medium" speed and then switches to "low" or "silent" after three seconds.
If speed was set to "medium" (C5) or "high" (C6) before switching off, the appliance
starts directly at "medium" or "high" speed.
"Natural" (A5) and "sleep" (A6) modes are not saved; in this case, "normal" mode
(A4) starts by default and the "oscillation" (B1), "timer" (B7) and "humidifier" (A1)
functions are memorised.
3b - AIR SPEED KEY (C7)
Air speed can be changed according to this sequence:
Silent --- > Low --- > Medium --- > High --- > Silent --- > ...
During this process, the air speed LED changes depending on the set speed.
EN - 10
.
.
.