1.
Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should
be taken to a specialized company for recycling. This device should be returned to your distributor or to
a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Toolland. Please read the manual thoroughly before bringing this device into service. If
the device was damaged in transit, do not install or use it and contact your dealer.
2.
Safety Instructions
Keep away from children and unauthorised users.
Always wear a suitable dust mask during use.
Always wear protective gloves during use.
Always wear protective eyeglasses during use.
The grinder disc and work piece may become extremely hot. Do not touch with bare hands.
Do not use in an explosive atmosphere.
3.
General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
Protect this device from shocks and abuse. Avoid brute force when operating the device.
Protect the device against extreme heat, dust and moisture.
Familiarise yourself with the functions of the device before actually using it.
All modifications of the device are forbidden for safety reasons.
Only use the device for its intended purpose. Using the device in an unauthorised way will void the
warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the
dealer will not accept responsibility for any ensuing defects or problems.
Damage to grinder, grinding disc, work pieces or any personal injury resulting from the use of this device is
not covered by the warranty.
4.
Features
suitable for angle grinders with 180-230 mm disc
5.
Overview
Refer to the illustrations on page 2 of this manual.
lateral support
1
grinder holder
2
grinder support bolt (M14)
3
protection guard
4
V. 00 – 07/11/2016
PM3230
USER MANUAL
5
6
7
8
3
clamping lever
clamping assembly, clamping part
clamping assembly, fixed part
base
©Velleman nv