MAC Audio TT 100 BK E Guide De Démarrage Rapide page 23

5. Press the TONE ARM button to lift the tone arm.
6. Gently push the tone arm so that it's over the record. The platter will
start rotating automatically.
7. Press the TONE ARM button again to lower the stylus onto the record.
When the tone arm reaches the end of the record, the platter will
automatically stop.
To control volume: Use the VOLUME knob. If you're connected to a
Bluetooth device, you can also use the controls on the device.
IMPORTANT: If you're using the STEREO OUT jacks, the VOLUME knob
does not control volume. Use the volume controls on your audio device
instead.
To stop the record and return the tone arm to its holder: Press the
TONE ARM button to lift the arm. Gently push the tone arm back to its
holder. The platter will automatically stop spinning. Then press the TONE
ARM button again to lower the arm into its holder.
23