Table des Matières
Publicité
Connecting the Player to Other Devices
VIDEO
Pr
Pb
Y
AUDIO
L
R
(OPTIONAL)
Connecting to a Display Using
the Component Video Output
The progressive scan component video
output on your DVD player provides the
highest quality video available.
Note: To be able to use a component
To connect to a display using
component video:
1. Use three RCA cables to connect the Y,
2. (OPTIONAL) To connect the audio
VIDEO
Y
Pb
Pr
3. Select YUV P-SCAN as the Video
L
R
S-VIDEO
AUDIO OUTPUT
COAXIAL
VIDEO OUT
4. Select the appropriate TV Type setting
12
video connection, your display
must also support progressive scan
video.
Pb, and Pr jacks on the rear of the
player to the corresponding
component video inputs on the display.
output to the display as well, use the
red (left) and white (right) connectors
on the included audio/video cable to
connect the AUDIO OUT jacks on the
rear of the player to the display's audio
input.
Output setting under the Screen Setup
menu on the player (see "Configuring
the Player" on page 58).
under the Screen Setup menu.
Publicité
Table des Matières
