Publicité
Before first use
1. Before using your appliance,
GB
remove all packing material, plastic,
labels, stickers or tags that may be
attached to the motor base, bowls or
attachments.
Warning! Never immerse the
housing, plug, or cord in water or any
other fluid.
Caution! Switch off the appliance
and disconnect from supply before
changing accessories or approaching
parts that move in use.
Getting started
1. Place the motor base on a dry, level,
stable, surface such as a countertop
or table. Keep it away from the
countertop edge. Be sure to leave
plenty of room around air vents at the
back of the appliance.
Caution! Ensure that the power
cord is unplugged.
2. Wash all parts, except for the motor
base, in warm soapy water. Dry each
part thoroughly before use.
If using the dishwasher, place
parts only on the top rack of your
dishwasher.
B
2. Tilting the motor head (B) up: gently
press the lever (A) downwards, the
motor head will then be lifted.
Warning: Keep fingers and hands
away from areas with movable
parts.
Note: As a safety precaution, once you
move the motor head up, it locks into
that position.
Note: If difficult to release locking
function, gently push motor head
downwards then press button (A).
3. The housing should only be cleaned
with a soft damp cloth, then dried
with a cloth.
Note: Do not use abrasive cleansers or
scouring pads to clean the surfaces of
your appliance.
A
A
3. Place the processing bowl onto the
motor base (the bowl will only fit
correctly on the base when the handle
is positioned to the right). Rotate the
handle clockwise to lock.
Warning: Never operate appliance
with the attachments wire whip, flat
beater or dough hook unless the bowl
is in place.
D
GR
NL
F
GB
B
25
Publicité
