SPOT X AT A GLANCE
DEVICE OVERVIEW
1
Power/Backlight
Power LED
2
Display Screen
3
S.O.S. Button
4
Directional Pad
5
Track Button
6
Back Button
7
QWERTY Keyboard
8
USB Power/Data Port
9
MAIN MENU ACTIONS
Opens Messages Screen
1
Sends Check In Message
2
Posts to Social
3
Fetches New Messages
4
Opens Tracking Screen
5
Opens Navigation Screen
6
Opens System Settings
7
Initiates S.O.S. with GEOS IERCC
8
4
1
2
3
5
6
4
7
8
9
Time
Status Bar
Main Menu
1
2
3
4
5
6
7
8
BLINKING GREEN
POWER LED
SPOT X is powered
on and battery life is
above 20%.
Press the Power button to power on
POWER BUTTON
the SPOT X. Long press the Power
button for 3 seconds to power OFF.
Long press the S.O.S. button for 3
seconds or until S.O.S. screen is
S.O.S. BUTTON
displayed to initiate an S.O.S. with
GEOS IERCC.
Long press the Track button for 3
TRACKING BUTTON
seconds to initiate tracking mode at
your set interval rate.
Press up, down, left and right to
DIRECTIONAL PAD
navigate to and highlight a section
on the screen.
Quick press the Back button to
BACK BUTTON
navigate to the previous screen.
Use the keyboard to create messages, contact names and other manual entries
QWERTY KEYPAD
as required.
The SPOT X Display screen allows for interaction with the Main Menu,
DISPLAY SCREEN
sub-menus, and other onscreen features.
Used to connect a Micro USB Cable to the SPOT X USB Port to charge the
USB POWER/DATA PORT
SPOT X device and to sync with SPOT MY ACCOUNT.
BLINKING RED
NO LED
SPOT X has either entered
SPOT X is powered
power saving mode due to
on and battery life
no button press or the unit
is below 20%.
is powered off.
While the SPOT X is powered ON, quick
press the Power button to toggle the
screen and keyboard backlight on and off.
While S.O.S. is active, long press the
S.O.S. button for 3 seconds to cancel the
S.O.S. with GEOS IERCC.
While Tracking Mode is active, long
press the Track button for 3 seconds to
cancel Tracking.
Press the center button to make
a selection.
Press and hold the Back button to
go back to the Main Menu screen.
5