AEG BSS 4841 Mode D'emploi page 32

English
32
5. Start the playback of your audio source. Listen to the
sound playback via the speaker.
6. For the further procedure, please refer to the user manual
of the external audio source.
Keep the rubberized cover closed when not in use.
NOTE:
If possible, adjust the volume of the external unit to a
comfortable level.
Cordless via Bluetooth
Bluetooth involves a technology for wireless radio connection
of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (Industrial, Scientific and Medical). Interference
can be caused for example by WLAN­networks, DAB radios,
cordless phones, or microwave ovens which work on the
same frequency band.
This device offers you the possibility to use a Bluetooth­en­
abled device. The functional radius is limited to approx.
15 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced
Audio Distribution Profile) and has a music­player function,
then you can also wirelessly transfer music to the device.
The A2DP profile involves a multi­vendor Bluetooth profile.
By streaming, stereo­audio signals are wirelessly transferred
between the playing device (source) and the receiving
device. To be able to remotely control the source, the play­
back device must support the AVRCP profile (Audio Video
Remote Control Profile.
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
Logging on Devices (Pairing)
Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in your
player (e. g. mobile phone). For this, refer to the operation
manual of your player.
2. Switch on the device. The indicator lamp (3) will flash blue.
This indicates that the unit is in pairing mode.
3. Choose the Bluetooth menu in your player and register
the device in your player. For this, refer to the operation
manual of your player. The device "AEG BSS 4841" will
show in your player as a selection.
Once the connection is successful, acknowledgment tones
can be heard from the speaker and the indicator light glows
blue. For the further procedure, please refer to the user
manual of the playback unit. If possible, adjust the volume of
the external unit to a comfortable level.
BSS4841_IM_new
NOTE:
• If the Bluetooth version of your playback device is
under V 2.1, you have to enter the password "0000" to
connect the devices.
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect
the devices.
• In case of problems with the registration of a replay
device, deactivate the WiFi­ / and mobile data function
in your playback device.
• The Bluetooth compatibility cannot be ensured for devic­
es (e. g. mobile phones) getting released in the future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
• Some of the mobile phone brands have an energy­sav­
ing mode. Deactivate the energy­saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to
stay activated in your player. Observe the operation
manual of your player.
• If a mobile phone on which you are playing music
receives a call, the music will be interrupted. Press the
/ button to receive the call. The sound will be
played back through the radio. Speak towards the
microphone or transfer the call to your mobile phone.
When doing this, please refer to the fade­in on the
display of your mobile phone. After you have terminat­
ed the phone call, the playback will resume.
• Automatic connection
If supported by your player (e.g. mobile phone), the
devices will be connected automatically. The prerequi­
site for this is:
­ The devices were already connected with each other.
­ Bluetooth is activated in your player.
Memory Card Slot
1. Switch on the device.
2. Flip the rubberized cover (9) open.
3. Insert the memory card into the designated opening
until it engages with a "click". The contacts must face
down. The device switches automatically to the SD mode.
Playback will automatically start after a few seconds.
For operation, please refer to the section "Description of the
Control Buttons".
Keep the rubberized cover closed when not in use.
NOTE:
Press the memory card gently to remove it again.
10.04.17