Parts Of The Mh941 Scanner - Metrologic Instruments MH941 Mode D'emploi

Parts of the MH941 Scanner

Becoming familiar with the features of the MH941 scanner will help when
operating the scanner. The following illustration and list explain the pertinent
parts.
Laser Output Window
Head Cable
The following functions are decoder /controller dependent.
Green LED
Red LED
ScanQuest™ Infrared
Object Sensor
Figure 2
The laser beam emits from this aperture.
Ths cable is terminated with a 9-pin squeeze
connector.
When the green light flashes on, the scanner has
read the bar code successfully. When the green
light turns off, communication to the host is
complete.
When the red light is on, the scanner is ready to
scan.
The scanner has an energy saving feature known
as ScanQuest that senses when a specified time has
elapsed without any scanning. If the unit remains
dormant for this time, the laser and motor will turn
off. In this stage, the scanner's computer is on
"stand by." To reactivate the unit, wave an object in
front of the IR (infrared) sensor or pick up the
scanner and direct the scan window downwards.
When the red light comes on, the scanner is ready
to scan.
5