Greencut PIN700C Manuel D'utilisation page 45

All information in this manual is relevant to your own safety and that of your environment. If you have any questions
about the information contained in this manual, consult a professional or contact the Official Technical Service.
The following information on hazards and precautions includes the most likely situations that may arise during use of
this machine. Consult all product documentation, packaging and labels before use.
If you encounter a situation not described in this manual, use common sense to use the machine as safely as possible
and if you see danger, do not use the machine.
USERS
• This product has been designed to be handled by users of legal age who have read and understood these
instructions. Do not allow underage persons or persons who do not understand these instructions to use the
product.
• Before using this product, familiarize yourself with it. Make sure you know where all the controls are, the safety
devices and how they should be used.
• If you are an inexperienced user we recommend that you practice doing simple work and, if possible, in the
company of an experienced person.
PERSONAL SAFETY
• Don't force this machine. Use this machine, accessories, tools, etc. according to these instructions, taking into
account the conditions and the work to be carried out. Using this machine for unintended purposes can cause
a dangerous situation.
• Be alert, watch what you're doing when you drive this machine.
• Avoid unintentional start-up of the unit. Make sure the switches are in the off position before connecting the
machine to an electrical power source.
• Do not use this machine when tired or under the influence of drugs, alcohol, or medications.
• Check that all security features are installed and in good condition. Do not use this machine if any of its
components are damaged. Do not use blunt or bent blades.
• Operate the machine only when it is on a fixed, stable, level surface. Slippery or unstable surfaces may cause a
loss of balance or control of the machine.
• Use only coating materials such as paints, enamels, varnishes, etc.
• During spraying, make sure there are no ignition sources nearby: open fire, cigarettes, sparks, incandescent wires,
hot surfaces, etc.
• Never point the gun at you or other people or animals.
• Do not place machine under gun while spraying.
• Avoid inhalation of solvent vapours from the appliance. Wear a mask.
• When working outdoors, observe the direction of the wind. When working indoors, make sure there is sufficient
ventilation.
• Do not spray the machine.
• Be sure to connect the hose correctly. The device is only splash proof when the air hose is properly connected.
• Do not use guns to spray flammable liquids.
• Do not operate the machine in rain or extreme humidity.
• Do not leave this machine running unattended.
WORK CLOTHES
• Dress appropriately. Do not wear loose clothing or jewelry that could get caught in moving parts. We recommend
the use of: Safety glasses, gloves and mask.
45
EN