Kimex 161-4320 Manuel D'utilisation page 18

RoHS2 Declaration of Conformity (LSDEEE2)
This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European
Parliament and of the European Council and amendment (EU)2015/863 on the restriction of the use of certain
hazardous substances in electrical and electronic equipment (RoHS2 Directive - RoHS2), it is declared to comply
with the maximum concentration values defined by the European Technical Adaptation Committee (TAC), which
are :
Substance
Lead (Pb)
Mercury (Hg)
Cadmium (Cd)
Chrome hexavalent (Cr6+)
Polybromobiphenyl (PBB)
Polybrominated diphenyl ethers (PBDE)
Bis (2-ethylhexyl) phthalate (DEHP)
Benzyl butyl phthalate (BBP)
Dibutyl phthalate (DBP)
Disobutyl phthalate (DIBP)
Some components of the above-mentioned products are not subject to these limitations, in accordance with the
provisions of Annex III of the RoHS Directive2 (WEEE Directive2 ) :
1. Mercury in cold cathode fluorescent lamps and external electrode fluorescent lamps (CCFL and EEFL) for
specific purposes not exceeding (per lamp) :
1.1. Short length (500 mm) : maximum 3.5 mg per lamp.
1.2. Average length (＞500 mm and 1.500 mm): maximum 5 mg per lamp.
1.3. High length (＞1,500 mm): maximum 13 mg per lamp.
2. Lead in the glass of cathode ray tubes.
3. Lead in the glass of fluorescent tubes does not exceed 0.2% by weight.
4. Lead as an alloying element in aluminium up to 0.4% by weight.
5. Copper alloy contains up to 4% lead.
6. High temperature solder (lead-based alloys contain 85% or more lead).
7. Electrical and electronic components containing lead in glass or porcelain
8. Piezoelectric devices or in a glass or ceramic matrix component
Concentration
maximale proposée
0,1%
0,1%
0,01%
0,1%
0,1%
0,1%
0,1%
0,1%
0,1%
0,1%
Page 18 de 22
Concentration
réelle
< 0,1%
< 0,1%
< 0,01%
< 0,1%
< 0,1%
< 0,1%
< 0,1%
< 0,1%
< 0,1%
< 0,1%