Assembly; Use; Placement In The Tub; Mounting The Backrest - Drive DeVilbiss Healthcare BOB Mode D'emploi

Assembly

Insert the left and right
suspension parts into the
guide tube of the frame
until you obtain the desi-
red width, then push the
respective locking button
(pic. 1).
Ensure that the locking knobs are clicked into place in
the end position.

Use

The width of the hanging bathtub seat is adjustable. The
width range can be found in the technical data.
IMPORTANT: Always adjust the seat such that the maxi-
mum support surface is ensured!

Placement in the tub

The edge of the tub must
be clean and dry. Always
adjust the width of the
supports to the maximum
width in order to guaran-
tee secure support (pic. 2).

Technical data

Product
Article number
HMV (medical aids
register) no.
Max. load
Seat width x seat depth
Overall width
Height of backrest
Color
Total weight
Frame material
Seat material
Drive Medical GmbH & Co. KG | As per: 28.05.2020 | Errors and alterations excepted
Bob with backrest
550400200
04.40.02.2011
120 kg
41 x 41 cm
74 - 85 cm
36 cm
white
3,1 kg
Aluminium, powder-coated
Plastic (PE-HD)

Mounting the backrest

The backrest is fully as-
sembled and is inserted
into the mounting tube (1)
on the underside of the
seat section. The locking
buttons must click into the
corresponding holes. (2)
(pic. 3)

Cleaning | Maintenance

• Clean regularly with a moist cloth!
• Do not use any aggressive cleaning agents!
• Do not use abrasive cleaners!
• Do not use any high-dose chlorine and vinegar-based
cleaners!
• To disinfect, a spray disinfectant can be used such as
Descosept AF or Bacillol AF.
• Check the screws regularly and tighten, if necessary.
• The product should not be exposed to temperatures
above 60 °C for long periods of time.
• In the event of defects, contact your specialist dealer
from whom you purchased this product.
Bob without backrest
550400100
04.40.02.1010
120 kg
41 x 41 cm
74 - 85 cm
white
2,4 kg
Aluminium, powder-coated
Plastic (PE-HD)
EN
inigung
Boby
12488KD
04.40.02.2015
120 kg
41 x 41 cm
67 - 78 cm
36 cm
white
3 kg
Aluminium, powder-coated
Plastic (PE-HD)
Instructions for use BOB / BOBY
9